USER PROGRAMMABLE: Charge wet cell deep cycle, AGM, or gel batteries. Can be factory programmed to charge Lithium's too.

Customize Your Charger With These Options:

Remote LED

Drive Lockout

Low Voltage

Alarm & Lockout

Temperature

Compensation

Remote

Ammeter

Extend the LED indicator and panel mount it.

36" length is standard,

or specify.

Prohibits equipment from being moved when charger is plugged into AC power to prevent damage to cord, plug and receptacle.

NOTE: Equipment must have this feature installed on it.

Prevents  life shortening over discharge of batteries by audible, and visual display. Can lockout equipment to prevent further damage.  See video here.

 

 

When operating in temperature extremes  it is necessary to  adjust voltage limits. This extends battery life, and is done automatically with this option.

Optional ammeter splices into DC lead.

Convenient mounting flange.

3" x 3" x 2" deep

2 ft. AC cord and 6 ft DC leads with 3/8 ring terminals are standard. Custom lengths and ends available

1

1

2

3

5

5

6

7

4

8

6

7

6

4

8

8

6

9

10

11

All models available in 230v 50Hz.  (Prefix OBXU)

OBE Temperature compensated float models.

 

Designed to charge and maintain starting and gel batteries. Voltage adjusts to ambient air temperature. Perfect for standby power applications. Not for deep cycle batteries that are cycled up and down.

 

Small - 6, 10, 15 Amp

The Spark is a 4 stage charger maintainer designed for wet cell, and AGM starting, and deep cycle lead acid batteries. A series of LED's indicate charge progress, and charge mode. The Spark comes with interchangeable clamps and ring terminal ends. Mount it on equipment, or move it from vehicle to vehicle. The Spark is waterproof, and is IP65 Dust, and water splash resistant.

 

SPEC's:

 

Input: 100-240VAC, 47-63HZ. .8 amps @ 115 volts. .4 amps @ 230 volts

 

Output: 5 amp, 12 volt -14.7 max. 13.5 float.

 

Battery size: 20-100 amp hour

 

Polarity protected, current limited.

 

Weight: .77 lb.

 

Warranty: 2 Years

 

NOTE: The Spark is an imported product partially designed by Quick Charge Corp.

Dimensional Information

 Vibration Resistant: Doesn't use delicate electronics Rugged Construction: Totally enclosed to resist the effects of water, dirt, and a harsh environment. IP65 rated. Near bullet proof: Tough die cast enclosure Reliable: Transformer based design Safe: Current limited, and reverse polarity protected. Slow turn on with as little as 2 volts in batteries. Scissor Lifts Standby Generators Electric Vehicles Electric Boats Floor Scrubbers Pallet Trucks Golf Carts Mining Oil Field Railroads RV's SOME APPLICATIONS:

Large - 15, 25, 35, 40, 50 Amp

Small - 6, 10, 12, 15 Amp

36-48 Volt, 40 Amp

#1 Replacement Charger Fits Almost Anyplace, on Anything.